close
The Wayback Machine - https://web.archive.org/web/20220602155538/https://onlinelibrary.wiley.com/doi/10.1002/jsfa.6960
Volume 95, Issue 11 p. 2159-2166
Review

Chemical composition analysis and authentication of whisky

Paulina Wiśniewska,

Corresponding Author

Paulina Wiśniewska

Department of Analytical Chemistry, Chemical Faculty, Gdansk University of Technology, 11/12 Narutowicza Street, PL-80-233 Gdańsk, Poland

Correspondence To: Paulina Wiśniewska, p.m.wisniewska@gmail.comSearch for more papers by this author
Tomasz Dymerski,

Tomasz Dymerski

Department of Analytical Chemistry, Chemical Faculty, Gdansk University of Technology, 11/12 Narutowicza Street, PL-80-233 Gdańsk, Poland

Search for more papers by this author
Waldemar Wardencki,

Waldemar Wardencki

Department of Analytical Chemistry, Chemical Faculty, Gdansk University of Technology, 11/12 Narutowicza Street, PL-80-233 Gdańsk, Poland

Search for more papers by this author
Jacek Namieśnik,

Jacek Namieśnik

Department of Analytical Chemistry, Chemical Faculty, Gdansk University of Technology, 11/12 Narutowicza Street, PL-80-233 Gdańsk, Poland

Search for more papers by this author
First published: 15 October 2014
Citations: 42

Abstract

Whisky (whiskey) is one of the most popular spirit-based drinks made from malted or saccharified grains, which should mature for at least 3 years in wooden barrels. High popularity of products usually causes a potential risk of adulteration. Thus authenticity assessment is one of the key elements of food product marketing. Authentication of whisky is based on comparing the composition of this alcohol with other spirit drinks. The present review summarizes all information about the comparison of whisky and other alcoholic beverages, the identification of type of whisky or the assessment of its quality and finally the authentication of whisky. The article also presents the various techniques used for analyzing whisky, such as gas and liquid chromatography with different types of detectors (FID, AED, UV–Vis), electronic nose, atomic absorption spectroscopy and mass spectrometry. In some cases the application of chemometric methods is also described, namely PCA, DFA, LDA, ANOVA, SIMCA, PNN, k-NN and CA, as well as preparation techniques such SPME or SPE. © 2014 Society of Chemical Industry

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.